Offering major benefits in performance, the VF range of drop through or
gravity fed metal detectors are ideal wherever common packaging materials
such as aluminium foil, metalized film are used or, simply where space is
a major factor.
Vertical packaging lines present challenges to metal detector
manufacturers or suppliers, in the form of limited installation space,
proximity of metal support structures, moving weigh hoppers or discharge
chutes etc, including a degree of engineering problems that commonly
exist in the installation. This is where the VF units have the advantage
of ignoring most of these problems.
Drop-through metal detectors are commonly used on Form Fill & Seal
machines and mounted just
above the forming tube, or other applications for gravity fed, free
flowing powders, pipeline, liquid or granular materials.
For pipeline applications, these units can be mounted in any position
with the ability to
operate with hot or cold products travelling at high speeds.
The VF metal detectors greatly benefit from its unique RF Electromagnetic
field suppression system, that enables the units to perform highly in the
most restricted of spaces, whilst operating in close proximity to fixed
or moving metal structures.
The VF range of detectors have an extremely low metal free zone of
approximately 40mm each side of the detector coils, and as a standard,
they are fitted with remote mounted controls up to 10 meters away for
ease of operation.
Detector Head weight:
Detection Sensitivity at Phase Out:
100mm unit........0.7mm mild steel & 1.2mm Stainless steel
150mm unit........1.2mm mild steel & 1.7mm Stainless Steel
200mm unit........1.6mm mild steel & 2.0mm Stainless Steel
Metal Free Zones:
100mm & 150mm units: 40mm each side for moving metal
200mm unit: 70mm each side for moving metal
Aluminium head construction, Coating is of Food grade Epoxy white.